PDA

View Full Version : A MAN-size Flash for the 10D/300D


Dukeofurl
27th of October 2003 (Mon), 08:19
Does anyone think that there is enough of a demand for Canon to come out with a TTL-E flash the size of a 480EG?

Vegas Poboy
27th of October 2003 (Mon), 09:18
I would'nt wait for it you might be better getting a third party lens such as Metz or Sunpack. From my understanding the Rebel D was realesed to capture the average consumer market so there will be very little options to upgrade for unless you can do some in home modifying.

Vegas Poboy
27th of October 2003 (Mon), 09:23
Oop's typing to fast, The last EOS Magazine that I've received states that the 10D can use the 480EG but again not to sure about the Rebel D.

nnguyen
11th of August 2005 (Thu), 20:58
do you have the instruction how to make the canon 480eg work with 10D ??? I tried but I can't make it work . thanks for help

scottbergerphoto
12th of August 2005 (Fri), 06:39
The 480EG is not compatible with ETTL. It is compatible with TTL-Canon Film Cameras, Manual Flash, and Auto Thyristor Flash. To use it on a 10D, 20D or any other Canon digital camera, you need to set it to Auto or Manual, not TTL. For that kind of money you would be better off with a Quantum T4D, which will do ETTL with a dedicated adapter cord, in addition to Auto and Manual.

fromny10d
24th of October 2005 (Mon), 15:45
Hi
I just get back from canon:
Thank you for contacting Canon product support about using your
Speedlite 480EG on your EOS 10D. We value you as a Canon customer and
appreciate the opportunity to assist you.

The EOS 10D is only compatible with the EX series Speedlite flashes.
Unfortunately, you will not be able to use your Speedlite 480EG with
your EOS 10D. I apologize for any inconvenience that this causes you.

We hope this information is helpful to you. Please feel free to contact
us again if you have any other questions or concerns.

Thank you for choosing Canon.

Sincerely,

Erik
Technical Support Representative