PDA

View Full Version : Firmware up date

DaveG
30th of October 2003 (Thu), 06:51
On the Canon site the new firware update corrects - amoung other things - the following:

"C.Fn-04 AE lock operations
Corrects the AE lock operations when C.Fn-04 custom functions 1 or 3 is selected."

First off what was the problem with the AE lock function before? I have changed C.Fn-04 to 1 in order to enable back focus, and I haven't noticed any problems. Am I missing something?
CyberDyneSystems
30th of October 2003 (Thu), 07:17
There are at least six cameras we could be talking about here in the EOS forum,.. ?

Any chance you could enlighten as to which you are referring :)
DaveG
30th of October 2003 (Thu), 07:28
CyberDyneSystems wrote:
There are at least six cameras we could be talking about here in the EOS forum,.. ?

Any chance you could enlighten as to which you are referring :)

The 10D
defordphoto
30th of October 2003 (Thu), 07:49
Already been addressed. See the full details at: http://photography-on-the.net/forum/showthread.php?t=19484
DonCoon
30th of October 2003 (Thu), 08:13
RFMSports wrote:
Already been addressed. See the full details at: http://photography-on-the.net/forum/showthread.php?t=19484

It might have addressed the full details but where did it address DaveG's question?

DaveG wrote:
"C.Fn-04 AE lock operations
Corrects the AE lock operations when C.Fn-04 custom functions 1 or 3 is selected."

First off what was the problem with the AE lock function before? I have changed C.Fn-04 to 1 in order to enable back focus, and I haven't noticed any problems. Am I missing something?
defordphoto
30th of October 2003 (Thu), 08:21
DonCoon wrote:
[b]It might have addressed the full details but where did it address DaveG's question?


No one knows yet. Best place to check is over at Rob Galbraith's site where Chuck Westfall from Canon hangs out.
CyberDyneSystems
30th of October 2003 (Thu), 08:53
DaveG wrote:
CyberDyneSystems wrote:
There are at least six cameras we could be talking about here in the EOS forum,.. ?

Any chance you could enlighten as to which you are referring :)

The 10D


Thanks,.
I had not seen the other thread yet, so I was scratching my head :)
PacAce
30th of October 2003 (Thu), 09:12
DaveG wrote:
On the Canon site the new firware update corrects - amoung other things - the following:

"C.Fn-04 AE lock operations
Corrects the AE lock operations when C.Fn-04 custom functions 1 or 3 is selected."

First off what was the problem with the AE lock function before? I have changed C.Fn-04 to 1 in order to enable back focus, and I haven't noticed any problems. Am I missing something?


Hmm, I wonder if it addresses a problem I reported to Canon a while back regarding the C.Fn-04 operation. See this thread for details:

http://www.photography-on-the.net/forum/showthread.php?t=10765#51207