View Full Version : problems with photos taken outside at cold temperature
matrad
27th of January 2004 (Tue), 12:26
Wile taking photos with my A70 outside at cold temperature I notice noise in the picture even if I use ISO 50-100
Any comments?
S45_fornow...
27th of January 2004 (Tue), 14:03
Could you post an example pic? Maybe the lens was fogged a little??
morim
27th of January 2004 (Tue), 14:27
How cold was it? :roll:
/morim
matrad
27th of January 2004 (Tue), 16:14
cold? I don't know exact temperature...I think 5°C and below
lens? no fogged-I check
example
http://www.photo.net/photodb/photo?photo_id=2084335
(large superfine)
platinumdoc
28th of January 2004 (Wed), 05:24
From my understanding, these digital cameras optimally run in temps from 30 F to 90 F. Check your manual for specifics.
mvrekum
28th of January 2004 (Wed), 05:35
cold? I don't know exact temperature...I think 5°C and below
lens? no fogged-I check
example
http://www.photo.net/photodb/photo?photo_id=2084335
(large superfine)
There is a note in the manual about the temperature in which the camera operates best. Please don't ask me on what page. :)
matrad
28th of January 2004 (Wed), 16:32
manual says
0-40°C
Heimdall
29th of January 2004 (Thu), 07:36
hmm... last weekend I took 20 pics, and some movie shots, up in the mountains here in Austria. Guess it was like -8 or -10 degrees celsius. I had the camera in an ouside, non-insulated pocket. Pictures looks nice. I was ouside for 4-5 hours.
Knut
Conk
31st of January 2004 (Sat), 11:07
Wile taking photos with my A70 outside at cold temperature I notice noise in the picture even if I use ISO 50-100
Any comments?
If your camera had not been outside for too long before taking photos then it is possible that you had condensation on the sensor. You may not have seen any on the lens which may lead you to believe that there was no condensation at all. It is a good idea to let your camera reach lower temperatures slowly before taking photos.
Icecamp
31st of January 2004 (Sat), 20:40
I have seen the same effect on some of my pictures scanned with my Canoscan 2720. I don't think it really has anything to do with the temperature. I have read this effect is called aliasing. It has something to do with the resolution(pixels per inch)and jpeg compression. I think your iso setting affects this effect also.
http://goinside.com/03/2/digital.html
Neat Image does a fantastic job of reducing this noise, you can pick up a copy for your own personal use for free from their website.
http://www.neatimage.com/
A high quality RAW or Tiff should eliminate this effect. Unfortunately the A70 doesn't offer the RAW format.
From my own experience with an S30, I experienced none of this noise while shooting on Alaska's North Slope near Prudhoe Bay. The temperature rarely got above -20F and exceeded -40 on some days. This was in the Spring! Anyway Neat Image should take care of that noise.
Jim
vBulletin® v3.6.12, Copyright ©2000-2012, Jelsoft Enterprises Ltd.