Bulb Setting

[45R]

Is there any software that I can use to manipulate the exposure time of the 10D say past 30 seconds.


Thanks!

45R

[Belmondo]

I don't think I understand your question. Manipulate in what way?

[johneo]

Likewise ... Not sure what you mean by "manipulate" the exposure time.

If you mean to leave the shutter open longer than the 30 seconds, you can get a remote cord.
The 1st one linked below you can set for the amount of time you want and is automatic (I'm assuming ??? ) and is on my wish list :roll:

The 2nd link is to another remote for the 10D but you have to release it when you have the exposure you want. That's the one I have and it works fine but, man, I have to pay attention ... :lol:


http://www.adorama.com/CATC80N3.html

http://www.adorama.com/CARS80N3.html

[Tom W]

If, by chance, you're referring to using the "remote capture" program to operate the camera from a computer, then I'm not sure that the "bulb" setting works. I tried it and got a warning box on the screen saying that the action was "stopped by the camera". It may be set up that way for some reason.

[GenEOS]

I have the TC-80n3, and it does a lot. I have only used it as a shutter release, but it can be set to do a bunch of extra stuff. It's user manual is a thick one. That surprized me. You can use it to do things like 100 shots at 20 second intervals....etc...

Is this what you are talking about?

[45R]

I edited the post to clarify my needs. I want to know if there is software that I can use to set the shutter speed past 30 seconds. This way I can use my laptop vs. the timer remote.

[Tom W]

45R, I think that there might be software available to control the camera in Bulb mode, but I don't know for certain. You may want to check in with an astrophotography forum, as these folks are doing all kinds of things to get a long exposure.

[WCannistra]

Try the following URL for Canon 10D remote control software using USB port:

http://www.breezebrowser.com/10DRemote/

[45R]

The BB software doesnt work for exposures past 30 seconds. Looks like the remote is the only way to do it.