PDA

View Full Version : Which cactus trigger, V1, V2, V3? Whats the diff?


mrrod2001
14th of May 2008 (Wed), 00:21
Ok so i'm about to choose a ebay trigger but which one?

Whats the difference between V1 and V2? Obviously V3 is the 16 channel but iv seen the V1 for around $15 and the V2 for about $28.

I would also want to do the mods on these.

Whats the difference and what do you guys suggest?

Canonymous
14th of May 2008 (Wed), 05:00
Can you tell us which flash you are using? V1 seems to be outdated now as it has been superseded with v2.
I just got this set (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170212576922) of v2s. Make sure you check the compatible flashes listed and that should be the one you get. v2 is the latest and v2s for 580exII.
Be aware that the 430ex has had many complaints of incompatibility on this board.

tim
14th of May 2008 (Wed), 05:10
They're just newer versions, and AFAIK there's no Cactus/Gadget Infinity V3. I have V2 hotshoe triggers, they work. I have V1 studio triggers, they work too. Neither are as reliable as a good brand product, and you often need to mod them by at least adding an aerial to get them working properly.

I got mine from www.gadgetinfinity.com but you can get em on ebay too. Hong Kong's easier for me than ebay.

mrrod2001
14th of May 2008 (Wed), 16:59
I have a 550 ex but I want to get a sunpak or two. Yes there is no V3 i was using that to describe the 16 channel ones on ebay. Im going to get the ebay trigger to break into the off camera flash world since there cheap.

tim
14th of May 2008 (Wed), 19:58
16 channel ones are V1, just FYI.

Azzure_7
4th of June 2008 (Wed), 18:31
So what's the difference other than
V2 use CR2 battery while V1(16channel) uses 2AA batteries.

V2 has hot shoe attached already so you don't have to get additional hotshoe.

pridash
5th of June 2008 (Thu), 01:26
Actually there is also a V2s, which is the current version. I believe this is the version GI brought out to address the compatibility issues that were apparent with the V2 version, esp with the Canon flash series...although some still experience problems with the 430ex.

I don't think there is any need to buy a V2 rather than a V2s unless the new version is not compatible with your flash, which I don't think would be the case unless you have an much older flash.

Azzure_7
5th of June 2008 (Thu), 14:40
If the version is the same, then this trigger below.
http://cgi.ebay.com/YN-Wireless-Flash-Trigger-V2s-for-Canon-580EX-430EX_W0QQitemZ140236645768QQihZ004QQcategoryZ3008 4QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Should work on http://www.gadgetinfinity.com/product.php?productid=16766&cat=274&page=1

It states V2s.
it's good coz it uses 2AA batteries.