View Full Version : flash extender for 430 EX II
SteveJa
26th of May 2009 (Tue), 18:43
who makes a good flash extender for a 430 EX II ?
this would be for my xsi with 430 ex II for birding.
When I look on B&H there is only one company listed and that is visual echoes.
as I dont know anything about them , I had a hard time finding them on B&H because I did not even know what they are called any help would be great.
Thanks
MT Stringer
26th of May 2009 (Tue), 18:59
That's it - the Better Beamer by Visual Echoes. Just make sure you get the one that fits your flash.
RPCrowe
26th of May 2009 (Tue), 19:36
Here are plans for a fabricated flash extender. I bought the fresnel lens but never got around to making the darn unit. Too lazy! I do not remember who sent me these plans so I cannot give dredit. Sorry!
maresp5
26th of May 2009 (Tue), 19:50
Hello SteveJa
I just received the exact Visual Echoes flash extender from B&H for my 430EX is afternoon. The build quality was not quiet what I was hoping for, basically a couple of pieces of plastic side walls and a plastic lens (sorry for the poor quality photos, taken with my webcam). The two sidewalls fit the side of the flashhead and are secured with a velcro strap. The lens then attaches to the ends of the sidewalls, also with velcro. I haven't had a chance to try it out on any birds yet, but I did fire up a few test flashes with it attached to my 430EX and the good news is it was producing a nice concentrated beam of light with each flash. So long story short, build quality some what lacking, but it appears to work as advertised. file:///C:/Users/Mario%20Esparza/Pictures/QuickCam%20Photos/Picture%201159.jpg
vBulletin® v3.6.12, Copyright ©2000-2012, Jelsoft Enterprises Ltd.