View Full Version : How do i achieve this type of shot
Subfightersandman
1st of October 2009 (Thu), 03:15
Can someone help me out with how to set up the lighting and exposure for this type of shot.
http://www.modelmayhem.com/pic.php?pid=12543882
and can a similar affect be created with 2 285s with shoot through umbrellas
any info would be helpful
Thank you
Roshan
FlyingPhotog
1st of October 2009 (Thu), 03:31
I'm betting that's nothing more than natural window light through shear curtains...
As to how to emulate it with flash, I'll leave that to those with a bit more experience.
dynamitetony
1st of October 2009 (Thu), 03:32
what your looking at and wanting to achieve is probablly the post processing
not the lighting/aperture setup
but , my guess is that you could easily achieve that with a flash and umbrella
Subfightersandman
1st of October 2009 (Thu), 03:53
so is this just a basic expose for the room, then light up the model with the flash. then in pp at a sepia type tone and some noise. Is that the jist of it.
eypuff
1st of October 2009 (Thu), 05:47
from what i can see.. in the 2nd picture frame you can make out a reflection of a large window.. possibly 3 small ones.. looks to me like it was shot w/ natural lighting.. then taken into photoshop or something to intensify the vignetting along with the sepia colors..
hawk911
1st of October 2009 (Thu), 11:05
The question for you would be how much room do you have. I agree it looks like a large window bank with natural light later in the afternoon. Notice the shadow direction. If you don't have that large window light, you need some room with a few softboxes set back to emulate the window. The shadows are pretty hard, so you might need the space to pull your lights back and get the same hard shadow.
charlesu
1st of October 2009 (Thu), 17:54
The hardest part is finding the pretty girl. After that, it's all down hill.
Subfightersandman
1st of October 2009 (Thu), 20:32
haha there is a model on model mayhem that wants to do a shoot like this so i have the girl lol. So if i am going to use flash since I am not sure if available light with be used would it be better to use bare flash instead of umbrellas, so i can get the harder shadows.
charlesu
1st of October 2009 (Thu), 21:43
Been a while since I used umbrellas but I recall they do cast some shadows.
jblaschke
2nd of October 2009 (Fri), 12:19
The PP also included some significant added vignetting to my eye. Easily added in Adobe Camera Raw.
FenixFoto
3rd of October 2009 (Sat), 14:38
It could be window light, but appears to me to be a big rectangular softbox to camera right. Likely placed in the bathroom using the door jams as a big barndoors. Also the reflection in the photo appears to show a velcro grid on tne front of the box. If that's not how the original photog did it, it is certainly how I'd replicate it and control spill.
leeport
5th of October 2009 (Mon), 21:46
Why dont you contact the photographer and ask him/her?
TooManyHobbies
15th of October 2009 (Thu), 21:53
I expected to see unique lighting, but it was just basic nothing special. Like photoshop there are a million different ways to do the same thing here. Looks like some vignetting done in pping on top of it.
LanceNelson
20th of October 2009 (Tue), 23:50
haha there is a model on model mayhem that wants to do a shoot like this so i have the girl lol. So if i am going to use flash since I am not sure if available light with be used would it be better to use bare flash instead of umbrellas, so i can get the harder shadows.
Use your umbrellas just back them farther away than you normally would.
mladen77
29th of October 2009 (Thu), 14:58
maybe the answer to your question is next picture same model, same bed, different corner http://www.modelmayhem.com/pic.php?pid=12493297&group_id=39956&ua=
hawk911
29th of October 2009 (Thu), 23:17
very 70s look- like film at 1600 iso
rushnp774
3rd of November 2009 (Tue), 12:25
It appears like just a single flash shot through an umbrella or softbox, then processed heavily in Photoshop. Things like heavy vignetting, added grain, monotone/sepia effect, etc. Mostly basic stuff, but it was all done VERY well in that shot, which is what makes it so good.
alphanumeric
6th of November 2009 (Fri), 09:44
maybe the answer to your question is next picture same model, same bed, different corner http://www.modelmayhem.com/pic.php?pid=12493297&group_id=39956&ua=
haha yep.
Is it the post processing you are worried about?
or is it more the lighting?
Subfightersandman
13th of November 2009 (Fri), 03:47
just the lighting the PP looks pretty basic but effective
vBulletin® v3.6.12, Copyright ©2000-2012, Jelsoft Enterprises Ltd.