flash metz with G3

[mbotija]

is compatible a 40 MZ2 Metz (with canon adapter) with G3. Works in TTL mode?.
Thanks

Manuel

[BobbyLee]

Good information about using non-Canon flashes with Canon PowerShots can be found on the Botzilla page:

http://www.botzilla.com/photo/G1strobe.html

I checked Metz's web site (Metz Adapter Page (http://www.metz.de/1_metz_2000/m_pages_english/main_index_e.php3?link=4&sub=6&linkname=mecablitz)) to see if they had an adapter to connect your flash to a PowerShot G2 (they haven't updated their site with G3 info yet) and they list an adapter for an 40 MZ-1i and 40 MZ-3i but nothing for an 40 MZ-2. Most Metz's don't seen to work in TTL mode on PowerShots including my 45CL-4 and 60CT-4 which connect to my G3 via an SCA 3102 M2 adapter.

Hope something in this helps,
BobbyLee

[mbotija]

Thank you very much for your information.
In the adapter Metz page I've tried this combination, Flash 44 MZ2 ( the same type as 40 Mz2) with G2 (not G3) and is not 100% compatible.

Manuel

[davetin]

Hi,

Can the flash works without using adapter? Such as A mode.