I decided to post a couple more pictures to go with the other post for a little more detail.
Gallery: 27 photos
Joined Jan 2017
Location: Pearland, Texas
Gallery: 43 photos
Joined Mar 2009
Location: Issaquah, WA USA
Good stuff; thanks for the write-up and the pics!
- Eric S.: My Birds/Wildlife (7D MkII, Canon 10-22 f/3.5-4.5, Canon 24-105L f/4 IS, Canon 70-200L f/2.8 IS MkII, Canon 100-400L f/4.5-5.6 IS)
Joined Apr 2011
Location: New York
Post edited over 1 year ago by iazybandit.
I must say thought, the B-Grip does a good job with gripped cameras because its made of plastic and the coverage area is longer.
And here is my old gripped 5D Mark III with Peak Design Capture Clip WITH ProPad also on my own belt
As you can see, even with gravity wanting to cause the camera to lean towards your leg, the B-Grip keeps it perpendicular to your leg.
And here is one with just a non-gripped camera with their belt
Canon :: 5D Mark IV | EOS M5
Cream of the Crop
Gallery: 18 photos
Joined Jan 2012
Location: Houston, TX
Post edited over 1 year ago by mystik610. (2 edits in all)
Snydremark wrote in post #18244608
That's precisely the beauty of the Capture system; I use that combination, frequently. Mount the plate on the bottom of the camera and just attach the dongle(s) for the strap to the plate or another attach point on the body, and then lock the camera into the clip while moving around; and then just take it out of the clip while you're actively using the kit. I should qualify this with, the clip works best as a shoulder mount rig...I've never been able to get it to work satisfactorily as a belt clip unit.
I do the same. The beauty of the peak design system is how flexible it is, and how well their products work together.