Catapillar ID please...

Psychic1 · 13th of July 2007 (Fri)

4 inches long and 1/2 inch in diameter. I moved it from the foundation of my house to a nearby flower bed.
Thank you in advance.

dpastern · 13th of July 2007 (Fri)

I just get a red cross, no image...

Dave

Psychic1 · 13th of July 2007 (Fri)

Some times pbase does that, right click on the red cross and choose *show picture*.
Thank you for trying.

Leorooster · 13th of July 2007 (Fri)

I think you link it incorrectly. Below is a FAQ from PBase.

How do I get the direct linking URL? To get the direct linking URL for an image, view the image and add .jpg or size.jpg to the end of the URL.

This works just like linking to an image page but append .jpg to the end of the URL.
example:www.pbase.com/image/imagenumber.jpg
example:www.pbase.com/image/imagenumber/size.jpg

Note: to direct link to a .gif, use the .jpg extension also. It will still send the gif file.

You can also easily get the direct linking URL by viewing the edit image page and looking in the top right corner of the page, where the URL for linking to the medium size of the image is given.

Psychic1 · 14th of July 2007 (Sat)

I resized and reposted, I hope you can see the picture now.
Thanks again.

dpastern · 14th of July 2007 (Sat)

Still nothing...

Dave

Psychic1 · 14th of July 2007 (Sat)

One final try.

Thanks

JaertX · 14th of July 2007 (Sat)

something's wrong...are you g6 on pbase? that person has no caterpillar pictures, but that's who you're linking to. weird.

Psychic1 · 14th of July 2007 (Sat)

I've been posting for about a 8 months without a problem, nothing has changed.
Thanks again.

Just checked my laptop, the picture is there.

dpastern · 14th of July 2007 (Sat)

Well, I can see the image now (finally). I'm not sure what type of caterpillar it is to be honest, hopefully someone else can help out. Nice image!

Dave

Psychic1 · 14th of July 2007 (Sat)

Thanks Dave, I was wondering why no one was answering.

JaertX · 14th of July 2007 (Sat)

yeah....weird. I'm not seeing anything. sorry.

Leorooster · 14th of July 2007 (Sat)

I had the same problem and I linked the images the way you are doing now. Once I followed the instruction as listed above and changed the way I link images, I haven't had any problem. Good luck and btw I don't see them

JaertX · 14th of July 2007 (Sat)

I'll try for you:

(link to Psychic1's picture)

not that I can help you with the ID though

here's how to link to pbase:
http://www.pbase.com/help/direct_linking&id=465

metalsaber · 14th of July 2007 (Sat)

^^

I see it now. Very nice btw.

13th of July 2007 (Fri)	#1
Psychic1 Member Join Date: Nov 2006 Location: New York Posts: 978	Catapillar ID please... 4 inches long and 1/2 inch in diameter. I moved it from the foundation of my house to a nearby flower bed. Thank you in advance. __________________ 1DsIII - 1DIII - TS-E24L - 35L - 24/70L - 24/105L IS - 70/200L IS 2.8 - 400L 5.6 - 580EX II & CP-E3 - 430EX - 2x 270EX II - ST-E3 - 1.4xII - 25mm Ext. Last edited by Psychic1 : 14th of July 2007 (Sat) at 08:41. Reason: Reposted the picture

13th of July 2007 (Fri)	#2
dpastern User is banned from forums Join Date: Aug 2005 Location: Ipswich, Queensland, Australia Posts: 13,765 IMAGE EDITING OK	Re: Catapillar ID please... I just get a red cross, no image... Dave

13th of July 2007 (Fri)	#3
Psychic1 Member Join Date: Nov 2006 Location: New York Posts: 978	Re: Catapillar ID please... Some times pbase does that, right click on the red cross and choose show picture. Thank you for trying. __________________ 1DsIII - 1DIII - TS-E24L - 35L - 24/70L - 24/105L IS - 70/200L IS 2.8 - 400L 5.6 - 580EX II & CP-E3 - 430EX - 2x 270EX II - ST-E3 - 1.4xII - 25mm Ext.

13th of July 2007 (Fri)	#4
Leorooster Cream of the Crop Join Date: May 2005 Location: New York Posts: 6,745	Re: Catapillar ID please... I think you link it incorrectly. Below is a FAQ from PBase. How do I get the direct linking URL? To get the direct linking URL for an image, view the image and add .jpg or size.jpg to the end of the URL. This works just like linking to an image page but append .jpg to the end of the URL. example:www.pbase.com/image/imagenumber.jpg example:www.pbase.com/image/imagenumber/size.jpg Note: to direct link to a .gif, use the .jpg extension also. It will still send the gif file. You can also easily get the direct linking URL by viewing the edit image page and looking in the top right corner of the page, where the URL for linking to the medium size of the image is given. __________________ Canon 1DMarkIII \| Canon 5DII \| Fujifilm Finepix F30 Glasses & Goodies Last edited by Leorooster : 13th of July 2007 (Fri) at 23:33.

14th of July 2007 (Sat)	#5
Psychic1 Member Join Date: Nov 2006 Location: New York Posts: 978	Re: Catapillar ID please... I resized and reposted, I hope you can see the picture now. Thanks again. __________________ 1DsIII - 1DIII - TS-E24L - 35L - 24/70L - 24/105L IS - 70/200L IS 2.8 - 400L 5.6 - 580EX II & CP-E3 - 430EX - 2x 270EX II - ST-E3 - 1.4xII - 25mm Ext.

14th of July 2007 (Sat)	#6
dpastern User is banned from forums Join Date: Aug 2005 Location: Ipswich, Queensland, Australia Posts: 13,765 IMAGE EDITING OK	Re: Catapillar ID please... Still nothing... Dave

14th of July 2007 (Sat)	#7
Psychic1 Member Join Date: Nov 2006 Location: New York Posts: 978	Re: Catapillar ID please... One final try. Thanks __________________ 1DsIII - 1DIII - TS-E24L - 35L - 24/70L - 24/105L IS - 70/200L IS 2.8 - 400L 5.6 - 580EX II & CP-E3 - 430EX - 2x 270EX II - ST-E3 - 1.4xII - 25mm Ext.

14th of July 2007 (Sat)	#8
JaertX Goldmember Join Date: Feb 2005 Location: Amarillo, Texas Posts: 2,018 IMAGE EDITING OK	Re: Catapillar ID please... something's wrong...are you g6 on pbase? that person has no caterpillar pictures, but that's who you're linking to. weird. __________________ Jason - I use Canon and stuff

14th of July 2007 (Sat)	#9
Psychic1 Member Join Date: Nov 2006 Location: New York Posts: 978	Re: Catapillar ID please... I've been posting for about a 8 months without a problem, nothing has changed. Thanks again. Just checked my laptop, the picture is there. __________________ 1DsIII - 1DIII - TS-E24L - 35L - 24/70L - 24/105L IS - 70/200L IS 2.8 - 400L 5.6 - 580EX II & CP-E3 - 430EX - 2x 270EX II - ST-E3 - 1.4xII - 25mm Ext.

14th of July 2007 (Sat)	#10
dpastern User is banned from forums Join Date: Aug 2005 Location: Ipswich, Queensland, Australia Posts: 13,765 IMAGE EDITING OK	Re: Catapillar ID please... Well, I can see the image now (finally). I'm not sure what type of caterpillar it is to be honest, hopefully someone else can help out. Nice image! Dave

14th of July 2007 (Sat)	#11
Psychic1 Member Join Date: Nov 2006 Location: New York Posts: 978	Re: Catapillar ID please... Thanks Dave, I was wondering why no one was answering. __________________ 1DsIII - 1DIII - TS-E24L - 35L - 24/70L - 24/105L IS - 70/200L IS 2.8 - 400L 5.6 - 580EX II & CP-E3 - 430EX - 2x 270EX II - ST-E3 - 1.4xII - 25mm Ext.

14th of July 2007 (Sat)	#12
JaertX Goldmember Join Date: Feb 2005 Location: Amarillo, Texas Posts: 2,018 IMAGE EDITING OK	Re: Catapillar ID please... yeah....weird. I'm not seeing anything. sorry. __________________ Jason - I use Canon and stuff

14th of July 2007 (Sat)	#13
Leorooster Cream of the Crop Join Date: May 2005 Location: New York Posts: 6,745	Re: Catapillar ID please... I had the same problem and I linked the images the way you are doing now. Once I followed the instruction as listed above and changed the way I link images, I haven't had any problem. Good luck and btw I don't see them __________________ Canon 1DMarkIII \| Canon 5DII \| Fujifilm Finepix F30 Glasses & Goodies

14th of July 2007 (Sat)	#14
JaertX Goldmember Join Date: Feb 2005 Location: Amarillo, Texas Posts: 2,018 IMAGE EDITING OK	Re: Catapillar ID please... I'll try for you: (link to Psychic1's picture) not that I can help you with the ID though here's how to link to pbase: http://www.pbase.com/help/direct_linking&id=465 __________________ Jason - I use Canon and stuff Last edited by JaertX : 15th of July 2007 (Sun) at 00:01.

14th of July 2007 (Sat)	#15
metalsaber Member Join Date: May 2007 Posts: 196 IMAGE EDITING OK	Re: Catapillar ID please... ^^ I see it now. Very nice btw. __________________ Metalsaber's Blog Metalsaber's Image Galleries Flickr Gallery Canon Rebel XTi, Canon 17-55IS USM, Canon 70-200 2.8 IS, Canon 100-400L USM, Canon 100 f2.8 Macro, Tokina 12-24, Canon Speedlight 580EX II

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
unidentified catapillar	bandit 1	Macro	11	5th of February 2007 (Mon) 13:45
Today at Umstead Park NC - Catapillar	TooManyHobbies	Macro	2	17th of July 2006 (Mon) 07:22
catapillar	gtjenkins	Macro	3	9th of September 2005 (Fri) 12:19