Canon Digital Photography Forums  

P.O.T.N. SUPPORT SHOP IS OPEN, check it out now!

Go Back   Canon Digital Photography Forums > 'Sharing Knowhow' section > Talk About Photography
Register Rules FAQ Members List Search Today's Posts Mark Forums Read



Reply
 
Thread Tools Display Modes
Old 12th of February 2009 (Thu)   #1
Gilly B
Member
 
Join Date: Jan 2007
Location: Powys, Mid Wales
Posts: 40
Default Castle lit up at night behind Bride & Groom

I was asked last night by the B&G for my next wedding in March if I would take them at night standing in the grounds of the Castle location where the reception is being held. The castle will be lit from ground uplighters (Sodium I think).

My dilemma is I have never done this type of photography and over the next couple of weeks I need to practice, practice and practice a technique.

I need to keep the dark atmosphere of a night shot, but light the couple up enough so they do not appear as silouettes.

Can someone point me in the right direction for best lens and recommend some settings to start me off. I have been thinking of low ISO and fast shutter speeds.

I would appreciate your experience and guidance on this. Many thanks - Gillian
Gilly B is offline   Reply With Quote
This ad block will go away when you log in as member
Old 15th of February 2009 (Sun)   #2
LORAC
Member
 
Join Date: Jun 2007
Location: UK
Posts: 113
Default Re: Castle lit up at night behind Bride & Groom

How about taking a hand held video light. Someone holding this, or if alone, placed at ground level pointing up, can give enough illumination for the couple while keeping the Castles exposure too.
LORAC is offline   Reply With Quote
Old 16th of February 2009 (Mon)   #3
neilwood32
Cream of the Crop
 
neilwood32's Avatar
 
Join Date: Sep 2007
Location: Sitting atop the castle, Edinburgh, Scotland
Posts: 6,111
Default Re: Castle lit up at night behind Bride & Groom

My guess is that you will need additional light (either a flash or video light).

Keep your camera on M, and meter for the ambient light. Then use the flash for fill light on the B&G (using FEC as required to get the amount of flash correct). You may need to gel the flash to balance the uplighters if you want the light balanced.

If you havent done anything like this before, go and practise at least once or twice with a friend as model before the big day as the couple wont want to hang about til you get it right.
__________________
Having a camera makes you no more a photographer than having a hammer and some nails makes you a carpenter - Claude Adams
Keep calm and carry a camera!

My Gear
neilwood32 is offline   Reply With Quote
This ad block will go away when you log in as member
Old 17th of February 2009 (Tue)   #4
Gilly B
Member
 
Join Date: Jan 2007
Location: Powys, Mid Wales
Posts: 40
Default Re: Castle lit up at night behind Bride & Groom

Quote:
Originally Posted by LORAC View Post
How about taking a hand held video light. Someone holding this, or if alone, placed at ground level pointing up, can give enough illumination for the couple while keeping the Castles exposure too.
Quote:
Originally Posted by neilwood32 View Post
My guess is that you will need additional light (either a flash or video light).

Keep your camera on M, and meter for the ambient light. Then use the flash for fill light on the B&G (using FEC as required to get the amount of flash correct). You may need to gel the flash to balance the uplighters if you want the light balanced.

If you havent done anything like this before, go and practise at least once or twice with a friend as model before the big day as the couple wont want to hang about til you get it right.
Thanks Guys for responding.

Very useful tips. I am going to the castle tomorrow night with my husband and camera gear. I will have a practice and let you know how I get on.
Gilly B is offline   Reply With Quote
Old 22nd of February 2009 (Sun)   #5
Dchemist
Senior Member
 
Join Date: Sep 2003
Location: Woodbury, Connecticut
Posts: 1,632
Default Re: Castle lit up at night behind Bride & Groom

Hiw did you make out?
__________________
POTN Book Vol4 Astronomy Image Manager and BC Member
20D, 5DMkII, 50F1.4, 100F2.8 macro, 135F2, 17-40F4, 70-200F2.8, 24-105F4, 580EX
Dchemist is offline   Reply With Quote
Old 16th of March 2009 (Mon)   #6
aliflack
Member
 
aliflack's Avatar
 
Join Date: Aug 2004
Location: York, UK
Posts: 401
Default Re: Castle lit up at night behind Bride & Groom

Exactly what NeilWood said - stick your camera in manual, setting ISO, shutter and aperture as needed to get the castle suitably illuninated. Then as long as you have a powerful enough flash (hotshoe mounted like a 430ex will be more than fine) and are close enough, fire away.

Check the first couple of shots and adjust FEC if needed (i.e. if the wedding dress is blown out) and use the histogram to keep the exposure as much to the right as you can to help avoid undue noise...

Good luck, reckon you'll get some excellent atmospheric pics out of this
__________________
40D, 16-35L F2.8, 24-70L F2.8, 70-300mm IS, 100mm F2.8, 85mm 1.8, 50mm 1.8, Elinchrom D-Lites, Mid Octa, 580 EX
My Portfolio: Alistair Flack Photography
Flickr
aliflack is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bride & Groom Anthony J Howe People 10 31st of May 2008 (Sat) 12:18
bride & groom in white? nursek Weddings and Other Family Events 19 2nd of August 2007 (Thu) 12:56
Meeting the Bride & Groom Leahred Weddings and Other Family Events 4 7th of April 2007 (Sat) 21:31
Bride & Groom Silhouett canon shooter Weddings and Other Family Events 3 6th of April 2006 (Thu) 19:34
Goofy Bride & Groom Maureen Souza People 11 21st of October 2005 (Fri) 18:37


All times are GMT -5. The time now is 22:58.


Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
This forum is not affiliated with Canon in any way and is run as a free user helpsite by Pekka Saarinen, Helsinki Finland. You will need to register in order to be able to post messages. Cookies are required for registering and posting. HTML in messages is not allowed, plain website addresses are automatically made active by the board.