Post your Pelican Case distribution Photos !!

noelty wrote in post #14892202
I was under the impression that the cases carry a lifetime warranty. What is their reason for their response, "may not be covered by the warranty"?

So it says on the Pelican website (I also send that quote to the online shop I bought it from).
I did not receive a response by the shop on my claim (that I believe this should be covered by the warranty). Hopefully this isn't going to cost me any money.

Tvw wrote in post #14892224
So it says on the Pelican website (I also send that quote to the online shop I bought it from).
I did not receive a response by the shop on my claim (that I believe this should be covered by the warranty). Hopefully this isn't going to cost me any money.

Contact Pelican directly. The shop does not back the warranty, the manufacturer does, and I am sure Pelican will replace it for you.

Here is the European contact info for Pelican

noelty wrote in post #14892212
Yup...

Thanks noelty!

Tvw wrote in post #14892233
Thanks noelty!

Here is the European contact from their website...

noelty wrote in post #14892246
Here is the European contact from their website...

Thanks for the help. I just finished sending them a message through the contact form! Lets hope this helps.

Thanks again!

eaphotos wrote in post #14377192
Where is the best place to buy pelican cases???

eBay,Adorama too,,

Heres mine
Peli 1620
Excuse the grainy iphone shot

does anybody know the SMALLEST pelican that can hold a canon 7D WITH grip upright with a lens on it? In other words, what depth does it need to be for it to fit? I am looking for a pelican that is more briefcase-like, not suitcase-like.

ewheeler20 wrote in post #14938019
does anybody know the SMALLEST pelican that can hold a canon 7D WITH grip upright with a lens on it? In other words, what depth does it need to be for it to fit? I am looking for a pelican that is more briefcase-like, not suitcase-like.

Pelican has some top-loading model cases like this:
http://www.pelican.com​/cases_detail.php?Case​=1440

The 7D and 70-200 need about 12", which should fit vertically. Is that what you're looking for? Or did you want to lay it flat in a regular case? Either way, you'll need one internal dimension to be 12".

Currently using my pelican 1510 to haul around camera and rigging equipment for my boom rig:

here is my pelli case distribution

HTTP response: 404 | MIME changed to 'text/html' | Byte size: ZERO

Heres my 1510
top left is a 70-200L IS v1 with a PW on top, top right is a 100-400L with PW on top and rocket blower, between the two is a ND filter

Bottom left to right is: 24-70L and CF cards, then 50 1.4 and hoods for 70-200 and 100-400 and lens pen, and chargers, then 40d gripped, then 7d gripped, then 1d mark III

just bought the 1510 and photographer's organizer from B&H. Free Shipping. Out the door, $180.

Would all the following fit into a Pelican 1600 w/ dividers?
-EOS 60D w/ grip
-EOS 5D MkIII w/grip
-EF-S 18-135mm f/3.5-5.6
-EF 24-70mm f/2.8L II
-EF 24-105mm f/4L (can be removed)
-EF 70-200mm f/2.8L II
-TS-E 24mm f/3.5L II
-EF 40mm f/2.8 STM pancake
-EF 50mm f/1.2L
-EF 85mm f/1.2L
-MP-E 65mm macro
-EF 100mm f/2.8L macro
-EF 1.4x & 2x Extenders
-600EX Speedlite

Thanks in advance for your help