I thought I would share this with the group
One of the best solutions for keeping your digital camera sensor clean! This sensor gel stick will work on any interchangeable lens digital camera – from a compact mirrorless to a full-frame DSLR. All you have to do is set the camera to “Mirror Lock-Up” mode (with the battery fully charged) and once the sensor is exposed, gently “walk” the whole sensor with the gelled side of the stick. After a single pass, use the adhesive paper (included inside the metal case) to remove the dust from the gel. Simply expose the sticky side of the paper, set it on a firm surface, then hold it with your fingers, while firmly pressing the gel on top of the adhesive surface. The gel should stick, but it will be easy to remove. Once cleaned, the gel can be reused over and over again. Repeat this process as many times as necessary to clean your sensor. Once done, turn off the camera, mount your lens, set it to the smallest aperture like f/32, then take a picture of a white surface. When you analyze the image, there should be no spots left.