I picked up mono light the other day to experiment with some studio stuff and I tested it out using 3 connections-
A) My yongnuo triggers
B) slaved using other flashes upon firing
C) and just to make sure it works, wired with the cable.
Now it went well, but I noticed that at 1/200 and 1/250, I got the black bars from the curtain closing....
At 1/160, all was well. Sharp image with no interference from the shutter...
What is the max sync speed for the 5dc? I looked on dpreview but could not find it.
Is this a limitation of the camera(i think not) or am I doing something wrong with the flash settings?
edit- and I guess I should go into more detail-
First off, I am aware that there is a max...in case it's written poorly, I am not trying to figure out HSS....I just want to know what my max sync speed is for the 5d. I assumed it to either be 1/200 or 1/250...was just surprised that it seemed to be 1/160.
Second, I believe this was happening whilst using the yongnuo triggers. I read somewhere that this problem went away upon using better triggers?
If thats the case, then ill deal because 1/160 will be fast enough for most anything anyway.