Godox and Cheetahstand users- Problem solved

Ulysses posted this in another forum we are in

too many questions about what works and what does not

start here

For Dummies like me who need something visual

Image hosted by forum (794189) © umphotography THIS IS A LOW QUALITY PREVIEW. Please log in to see the good quality stuff.

umphotography wrote in post #18013195
Ulysses posted this in another forum we are intoo many questions about what works and what does not start here

For Dummies like me who need something visual

THAT are a lot of problems solved for a LOT of people at once. I feel a lot beter now.

You sir, are wonderful.

thats the old one this is the new one

even better

abbadon31 wrote in post #18013830
thats the old one this is the new one

Progress happens QUICKLY. Blink and you might miss it!

At least I'm on the right track!

abbadon31 wrote in post #18013830
thats the old one this is the new one

Hosted photo: posted by abbadon31 in
./showthread.php?p=180​13830&i=i186267596
forum: Flash and Studio Lighting

Comprehensive group of trigger/controller options.
Looking forward to testing the XT32s with Masking and sequencing feature.

dmward wrote in post #18014152
Comprehensive group of trigger/controller options.
Looking forward to testing the XT32s with Masking and sequencing feature.

The XT32 is so much easier to use and faster
PS Easier to read for us older eyes

abbadon31 wrote in post #18014263
The XT32 is so much easier to use and faster
PS Easier to read for us older eyes

Easier to use compared to what?

ptcanon3ti wrote in post #18014292
Easier to use compared to what?

the 3 other option shown in the list, because I don't need TTL

abbadon31 wrote in post #18014263
The XT32 is so much easier to use and faster
PS Easier to read for us older eyes

Probably, however TTL makes the X1T variants essential for my kit.
I like the larger screen on the 32 but its the capabilities, i.e. Masking and sequence setup that are important. Especially with HSS support for shooting out door sports etc.

was missing the blue lines for the xt32

All I care about are group control, power output control, and HSS. Looks like the XT32 and X1 receivers are going to do all that for me
Although it looks like I'll need to get a USB 2.4GHz receiver for power control on my 1st version CL360 since the XT32 won't work with it.
This chart man, this chart should be a sticky!

Here is the last and final updated version I'm going to make