So my Flashpoint Streaklight 360 TTL for Canon (Godox AD360II-C) showed up today along with the Phottix Laso Receiver and I've encountered some difficulty maybe someone can help me out with. Goal here is to use the Canon RT system with the AD360II-C.
Also tried my YNE3-RX on the 360 with no success. It paired fine with my ST-E3-RT but like others here it never fired the flash.
Mounted the Laso to the 360 and configured it for the CH2, Group C, ID to match my Canon ST-E3-RT and immediately got the Laso to pair with my ST-E3-RT without any difficulty. I put the 360 in manual mode but no mater how adjust the power level on the ST-E3-RT there is no change on the 360. What mode do I place the 360 in so it gets info through the Laso to set the power level? Would that be ETTL even though the ST-E3-RT has group C set to manual at say 1/64 or 1/8 power?
I want the group setting on the ST-E3-RT to be inherited by the 360. I really only remote power control of the 360 via the ST-E3-RT combined with the Laso but would like all mode to be set by the ST-E3-RT. I'm specifically not using the 360's radio link with slave mode since I know that only works with the Godox transmitters.
Thanks in advance for any help.
p.s. My X1T-C hasn't shown up yet but I tested the 360 with my X1T-S and it worked great. Really nice to have a light that can work with both my Canon and Sony systems. Also plan to use the AD360II-C paired with my Sony system and the X1T-S and TT685C. Have an older CL-180 which has a new XTR-16.