Sony Lounge Thread MKIII (All Sony cameras welcome)

rantercsr wrote in post #18374853
I find that I usually need to bring orange down a bit for more natural looking skin tones,,,
any other suggestions in my search of natural looking skin tones would be appreciated

a7sii + 90mac

IMAGE LINK: https://flic.kr/p/VCW3​tp DSC07180-Edit-4 by Randall Herrera, on Flickr

Desaturate by about -8 or add a channel mixer in PS, check the monochrome option, then reduce the channel mixer layer opacity to about 20 or 30

A few more with the 24SSM

IMAGE LINK: https://www.flickr.com …076/in/datepost​ed-public/

bz17716

IMAGE LINK: https://www.flickr.com …474/in/datepost​ed-public/

dino2216

IMAGE LINK: https://www.flickr.com …224/in/datepost​ed-public/

vegas3716

Thanks will definetly give that a try !!

here...

rantercsr wrote in post #18374853
I find that I usually need to bring orange down a bit for more natural looking skin tones,,,
any other suggestions in my search of natural looking skin tones would be appreciated

a7sii + 90mac

IMAGE LINK: https://flic.kr/p/VCW3​tp DSC07180-Edit-4 by Randall Herrera, on Flickr

I don't know if this will be of much help or not but sometimes when you apply a levels or curves adjustment layer in PS, it can oversaturate your subject and make skin tones look off too. Try changing the blend mode of any levels/curves adjustment layers from 'Normal' to 'Luminosity'. That way, the adjustments won't affect the color tones.

And as Vinz says, sometimes just by reducing the vibrance can improve skin tones as well.

Charlie wrote in post #18374837
I use "Focus Standard" rather than "Focus Settings"

The floating AF

I'm sorry Charlie, I must be really stupid.. I can't find how to change between focus standard and focus settings.. so honestly have no idea what is a floating AF.

Thanks .. yes ,, you are right , when adding curves sometimes I hold back on it because it affects other things ...
will try that Thanks!!

navydoc wrote in post #18374903
I don't know if this will be of much help or not but sometimes when you apply a levels or curves adjustment layer in PS, it can oversaturate your subject and make skin tones look off too. Try changing the blend mode of any levels/curves adjustment layers from 'Normal' to 'Luminosity'. That way, the adjustments won't affect the color tones.

And as Vinz says, sometimes just by reducing the vibrance can improve skin tones as well.

when you want use curves or anything to adjust luminosity, change the layer blending mode to luminosity. if you do that, it will not affect the saturation or colors.

rantercsr wrote in post #18374905
Thanks .. yes ,, you are right , when adding curves sometimes I hold back on it because it affects other things ...
will try that Thanks!!

when you use curves to adjust the brightness only, change the layer blending mode to luminosity

when you use curves to adjust the colors, change the layer blending mode to color.

rantercsr wrote in post #18374905
Thanks .. yes ,, you are right , when adding curves sometimes I hold back on it because it affects other things ...
will try that Thanks!!

You could also add a 'Selective Color' adjustment layer and on the Reds, increase cyan some and reduce magenta a bit. I don't have set numbers to use for adjusting skin tones since everyone is different so play around until you're happy with the results.

Last one from the series.

A6000+2470GM

joonrhee wrote in post #18374904
I'm sorry Charlie, I must be really stupid.. I can't find how to change between focus standard and focus settings.. so honestly have no idea what is a floating AF.

I have it setup on my center button.

It's similar to Focus Settings ( the focus change settings button), but it enables a floating AF when using flexible spot AF.

a7R II + Batis 25mm

IMAGE LINK: https://flic.kr/p/VztX​Hd

Terrible harsh light for this, but I was only passing through and couldn't wait for the perfect light...will do that later.

a7R II with Batis 18mm and Tiffen variable ND:

IMAGE LINK: https://flic.kr/p/UpE3​TZ

David Arbogast wrote in post #18374986
a7R II + Batis 25mm

IMAGE LINK: https://flic.kr/p/VztX​Hd
Refresh Yourself in Downtown Milledgeville by David Arbogast, on Flickr

David, to my eyes, the reds in the Coca Cola sign seems a bit too warm, especially because of the color temp. of the street lamp. You may disagree with it but I wondered how the sign would look if the reds were...redder. So, I added a hue/saturation adjustment layer and changed the blend mode to Luminosity, selected the reds and moved the lightness slider to darken. I also bumped the reds saturation up while still in that blend mode and came up with the result below.

Only the reds were affected by this adjustment.