I've got a lot of reservations about starting this thread, but I voiced them on my blog and it might make for another topic of discussion if someone wants to talk about what I wrote in another thread. I felt that mentioning my reservations is warranted cause many of you have some strong opinions about light, and not everything that I'm going to mention in this thread can necessarily be quantified. Funny thing about macro is that it seems to attract a lot of really intelligent people. Unfortunately most of them can't wrap their heads around anything that cannot be measured in a lab and successful tested. An example is that I like diffused light that looks "feathered". Do I know what that light looks like when I see it? Yup. Can I accurately describe it to you? Would be tough in a forum post, especially since I don't feather my light by rotating the flash away from the subject. We're also not going to get into a discussion about the best way to diffuse a light source because it's too style dependent. I'd love to be able to use studio lights and huge soft boxes. Unfortunately it's a little tough to hand hold that kind of gear and chase after hyperactive subjects...
Note: The 1/focal length rule for determining the slowest shutter speed for hand holding a lens breaks down at 1x and higher magnification. You actually need much faster shutter speeds for shooting macro because motion as little as half the width of a pixel is enough to amplify diffraction. When shooting with the flash as your primary light source for the subject the duration of the flash becomes your "shutter speed". Although not as obvious as stopping a balloon in mid pop, or a bullet as it passes through an apple, flash based macro is a form of flash based stop motion photography. The more control you have over movement (yours and the subject) and the shorter the flash duration the sharper your images are going to be. A lot of the image softness that is blamed on diffraction is really just motion amplified diffraction, or what I like to call "macro motion blur". It won't look like traditional motion blur, but it will rob you of sharpness like diffraction does.
Let's start off by looking at a common mistake that I see people making, especially people who are struggling with the bright spot in the specular highlights that a flash tube can make. I was speaking with a shooter several years back who had solved the hot spot problem by cutting a hole in a white opaque plastic cutting board and mounting it to the front of his lens. I couldn't find an actual photo of it, but the light quality looked something like this:
Edit: The original image link no longer works. I'll update this post with a suitable replacement if I find one.
On the surface that might seem pretty good. No small central hot spot and light that looks pretty soft, at least from what I can tell looking at the reflection on the table. But the guy who was using it to diffuse his flash for macro complained about slow flash recycle times, and that his images seemed under exposed above 1x. The problem was that the cutting board was doing a better job of blocking the light than diffusing it, and his flash was firing close to or at full power most of the time. I think that this cutting board is a good example of a material that will diffuse a flash, but just because it can diffuse the light that doesn't mean that you should use it.
Lens mounted diffusers can be pretty effective, provide the flash is actually pointed toward the subject and not just camera mounted and firing straight ahead. Here's an example of one made by John Hallmen, although it could use some improvements.
The general idea is to use the diffuser to shade the subject, so that the flash is the primary light source. You can then "walk the shutter" (decrease the shutter speed) to expose for the natural light in the background. One way to improve his design it to place something over the flash that will force any reflected light off of the back of the diffuser to go out the front. It would also prevent ambient light from coming though the diffuser (easier to make the flash the only light source on the subject). If you click on the image you'll get John's Flickr post with his list of pros and cons on using that diffuser. Also here's an example of what I mean by using the flash as the primary light source on the subject:
IMAGE LINK: https://flic.kr/p/p6K3fH Image One by John Kimbler, on Flickr
While shooting that bee the flash didn't fire and you can see that the critter is almost a silhouette. I have the camera set to expose for the background (although a little under exposed). So I can use the flash to expose the subject and it's shorter than the shutter speed duration help to freeze motion.
IMAGE LINK: https://flic.kr/p/oPw9vC Image Two by John Kimbler, on Flickr
A camera mounted flash, with a lens mounted diffuser, will work (example here) and the light will be feathered because the flash isn't pointed directly at the subject. But since the flash is firing straight ahead it's not very efficient and you might run into problems keeping your flash duration short enough to freeze motion.
Ring flashes -just say no. They are very convenient and easy to use. But the light will look flat because the flash heads are too parallel to the lens, and because a ring flash almost wraps completely around the lens. So even when using ratio control to make one flash head brighter than the other the resulting light can still look pretty flat. Here's an example of the light "quality" that I was getting with a Canon MR-14EX over 10 years ago.
IMAGE LINK: https://flic.kr/p/FjFxi Bee at twice life size series 1-2 by John Kimbler, on Flickr
For some of you the light in that image is gonna be acceptable, but for me it's not. Even with a 4:1 ratio difference between the two flash heads the light still looks flat, and the specular highlight is pretty ugly. I have seen some attempts at adding a diffuser to a ring flash, as well as trying to mount one by not connecting it to the end of a lens. But unless you're a dentist, who needs to photograph a patient's teeth, you're better off with any other light source.
I'm going to end this post here, with more to come later if you all want to continue this discussion. Keep in mind that I'm leaning more toward looking into light quality and diffuser efficiency, since both can effect the amount of detail that you can get in an image. Here's a pretty good example of what I'm currently getting with my light, although I'm constantly looking to improve it:
IMAGE LINK: https://flic.kr/p/FvZvof Newborn Blue Mason Bee I by John Kimbler, on Flickr