Working as intended or have I missed the obvious?
I recently got the XC 50-230 that don't have an aperture ring - no problem, just set the apperture with the back wheel of the camera. This works nicely on my X-E2S, but on the X-T30 it will only work in P-mode (I normally use A-mode - shutter on A, and chose the apperture with the ring on lens, or back of camera). I have also got the XF 27, and it always worked as intended, but I have primarily used it on the X-E2S. I checked it on the X-T30 and it also would only go to P-mode.
On the X-E2S I can change from A to P by scrolling past the highest apperture number, but that won't work on the X-T30.
Is this as it should be on the X-T30, or have I missed something obvious?
Edit: Found it. On the X-T30 you use the front dial for the apperture but I had the front dial set to select ISO. Changed now At the same time I swapped the Q and the AEL buttons, so now BBF is much easier and I don’t get the Q-menu unless I want it