Why is there always Geek Talk at 2am! #0.6x5 (Enter at your own risk!)

SUB1IM388 wrote in post #12080726
That's real dirty omar

FJ LOVE wrote in post #12080743
oh and did i say FAST !, this lens is blazing fast

One more dirty shot. Trust me you want to see this fast one

http://www.flickr.com …/jonsylvester/4​805263045/

Jill-of-all-Trades wrote in post #12080736
Never mind Steven. You just keep going the way you're going. Throw some more styrofoam around your computer, that'll keep it safe.

I thought you were referring to the shock I get from the case Mel it eliminated already... I am still trying to figure out about the grounding part. not sure what I could do about it yet.

monk3y wrote in post #12080764
I thought you were referring to the shock I get from the case Mel it eliminated already... I am still trying to figure out about the grounding part. not sure what I could do about it yet.

The shock you get from the case and the grounding problem are the SAME PROBLEM.

vipergts831 wrote in post #12080759
One more dirty shot. Trust me you want to see this fast one

http://www.flickr.com …/jonsylvester/4​805263045/

that's gonna get me in trouble in two ways one cause I like it and really really want the lens two cause the boss (the wife ) will think I'm searching porn will I'm laying next to her.....

vipergts831 wrote in post #12080751
I agree Martin!

Im calling your computer the Terminator!

that's funny Omar, i hope it performs like the terminator

my old PC sounds like a jet compared to this one, it's stealthy quiet and all the fans are on full

Jill-of-all-Trades wrote in post #12080736
Never mind Steven. You just keep going the way you're going. Throw some more styrofoam around your computer, that'll keep it safe.

Jill-of-all-Trades wrote in post #12080783
The shock you get from the case and the grounding problem are the SAME PROBLEM.

ok I am not getting shocked anymore since I put some insulation at the bottom of the case... my only concern now will be lightning as I said earlier... power surge brought about by other appliances or motors in the vicinity should be prevented by the Servo Motor AVR.

FJ LOVE wrote in post #12080810
that's funny Omar, i hope it performs like the terminator

my old PC sounds like a jet compared to this one, it's stealthy quiet and all the fans are on full

same here... the Noctua fans are quiet..and so are the NZXT fans as well.. I don't hear them at all hahaha I just know its on coz the blue lights turns on as well

vipergts831 wrote in post #12080759
One more dirty shot. Trust me you want to see this fast one

http://www.flickr.com …/jonsylvester/4​805263045/

haha, that's what i use the lens for too, Danny needs to try this

monk3y wrote in post #12079826
hey Nick, you did not answer my question regarding CPU temps

I would reinstall the heatsink and see if that improves anything.


Also, run Prime 95 for a few hours and watch the temps.

FJ LOVE wrote in post #12080830
haha, that's what i use the lens for too, Danny needs to try this

very nice perky!!

Jill-of-all-Trades wrote in post #12080255
Yeah, it's dead in here all right.

I'm not quite dead yet.

*sigh* wrote in post #12080837
I would reinstall the heatsink and see if that improves anything.


Also, run Prime 95 for a few hours and watch the temps.

how high should I allow it? I run prime95 for like 30minutes and I got about 64degrees

FJ LOVE wrote in post #12080564
here it is almost finished Steven

Hosted photo: posted by FJ LOVE in
./showthread.php?p=120​80564&i=i158070986
forum: The Lounge

Beautiful.

But you really need to replace that fan on your heatsink...

monk3y wrote in post #12080845
how high should I allow it? I run prime95 for like 30minutes and I got about 64degrees

That perfectly fine.


I'd say with sandy bridge I'd feel comfortable into mid 70s.

*sigh* wrote in post #12080846
Beautiful.

But you really need to replace that fan on your heatsink...

why? that's a noctua fan... not good? I am also using a Noctua P12 designed for heatsinks