I just got my RT-32N Module and PW plus II. I have a sekonic l-358. Both RT-32N and L-358 are CE. The module is properly attached to the meter since the wireless trigger icon appeared. I attached my PW plus II to the 580 ex II and placed on ch 1. I put the lightmeter to channel 1 also. When I press the trigger button, the flash did not trigger. I change the setting to ETTL, then to manual but still got nothing. I followed other instructions but I am now clueless regarding the problem. I dont know why the signal from the lightmeter is not being read by the PW. I tried PW to PW from my camera to the flash and it works fine. I can not trigger the camera with the PW from the lightmeter. I tried placing a cable directly from flash to lightmeter, it did not trigger the flash but gave me a reading. Any one help because its getting frustrating. Other wise I'll just use the module to balance my table LOL. Thanks for the replies.
