Decent seamless paper wall mounting system ?

I found this, but open to suggestions. Does anyone know of a decent one around, or under $100 bucks ?

http://www.bhphotovide​o.com …all_Mounting_Ki​t_for.html

ebay

Here's what I use. Plant hanger bracket from the dollar store ($1.00) x2, plus a 10' length of electrical conduit ($5.99). Works perfect. Room for 2 rolls if you need.

HOSTED PHOTO
please log in to view hosted photos in full size.

Picked up this one from Amazon. Has worked great and is somewhat cheaper. I have three rolls hanging from the ceiling.

http://www.amazon.com …ics&qid=1302267​348&sr=8-1

Wallace River wrote in post #12182410
Here's what I use. Plant hanger bracket from the dollar store ($1.00) x2, plus a 10' length of electrical conduit ($5.99). Works perfect. Room for 2 rolls if you need.

Thanks for this awesome DIY. Exactly the project I was hoping to conquer this weekend.

Cheers.

Wallace River wrote in post #12182410
Here's what I use. Plant hanger bracket from the dollar store ($1.00) x2, plus a 10' length of electrical conduit ($5.99). Works perfect. Room for 2 rolls if you need.

It seems like weight of the paper against the wall might be enough friction to keep it from unrolling on its own (good thing). Have you found that to be the case? I'm currently using "J" hooks on superclamps, but I also have to use clamps on the roll itself to keep it from unrolling.

munzzzzzzz wrote in post #12200102
It seems like weight of the paper against the wall might be enough friction to keep it from unrolling on its own (good thing). Have you found that to be the case? I'm currently using "J" hooks on superclamps, but I also have to use clamps on the roll itself to keep it from unrolling.

You're quite right, I don't need to use clamps, at least with the one roll. I actually have the black seamless roll on the opposite side of that same beam.

Very nice... I have two sets of three U-bolts mounted to 2x4's that I was planning on attaching to my floor joists to give me the ability to hold up to three rolls, but I was still trying to figure out a good way to keep them from unrolling without having to use the clamps. I think I might just scrap them and steal your idea instead.