quick strap removal

i have my crumpler industry disgrace on the camera at all times, but i would love to have a faster way of temporarily removing it than undoing the straps. ideally, the straps would connect to one side of some sort of quick release connector, and the other side of the connector would attach to the body loops.... ive heard of adapt-its, but cannot find anything on google. would adapt-its do what i am looking for, and if not, is there anyting like it?

edit: found adaptits, but thats not what i had in mind - it looks like they would slip out of the camera loops if unattached.

ekinnyc wrote in post #13779858
edit: found adaptits, but thats not what i had in mind - it looks like they would slip out of the camera loops if unattached.

They def do not, they are a pain to get in and out. This is what I use: LINKLINKLINK

Are you looking for 2 sets of these?

http://optechusa.com …-connectors/uni-loop.html

These are great on my 7D! I have 2 straps with swivel snaps... one plastic and one metal. The adapt It provides for quick and safe connection while protecting the camera. http://www.amazon.com …TF8&qid=1327712​501&sr=1-1
Normally I'm using only a hand strap but I can easily add the neck strap while maintaining the hand strap with the adapt Its.
It's a good one for me!

wunhang wrote in post #13779902
Are you looking for 2 sets of these?

http://optechusa.com …-connectors/uni-loop.html

yeah!
thanks.

but would the loops be strong enough to support a 50D with a 24-105 on it?

ekinnyc wrote in post #13779858
edit: found adaptits, but thats not what i had in mind - it looks like they would slip out of the camera loops if unattached.

They absolutely don't. Now getting them on can be a bit of a pain. Soak in hot water for a while.

thanks for the suggestion simon. looks like adapt-its wouldnt help - they would just create a larger loop. i am looking for what wunhang suggested a few posts above

ekinnyc wrote in post #13781652
yeah!
thanks.

but would the loops be strong enough to support a 50D with a 24-105 on it?

Those things are strong. One can easily hold a gripped 5D + 100-400 + 580EXII. The only thing to watch out for is abrasion on the paracord portion of it. If they ever get worn looking, replace them.

ekinnyc wrote in post #13781652
yeah!
thanks.

but would the loops be strong enough to support a 50D with a 24-105 on it?

Absolutely not a problem.

Our old Loop Gen I used a similar system (paracord sewn into some webbing, OpTech uses leather). The lowest we could ever get one to fail on a static test was 200lbs. OpTech units are roughly the same strength (we both use/used Duraflex buckles, the best in the business!)