Oh. I bought it to make a filter holder for my 17 TS-E. 
jdizzle Darth Noink  69,419 posts Likes: 65 Joined Aug 2006 Location: Harvesting Nano crystals More info | Jun 01, 2012 19:47 | #1171 Oh. I bought it to make a filter holder for my 17 TS-E.
LOG IN TO REPLY |
MOkoFOko nut impotent and avoiding Geoff  19,889 posts Likes: 22 Joined Jun 2010 Location: Michigan More info | Jun 01, 2012 19:47 | #1172 *sigh* wrote in post #14518376  Oh c'mon that's far from a facepalm. Foundation kits are hard to sell. I knew I was going to buy filters soon after, so I didn't want to sell it and then have them be out of stock everywhere when I needed it.  :p Soon after turned out to be 12 months  Should have went with a big stopper instead--you might have it in your hands by now!!I see foundation kits pop up 2-3 times a week on FM. On ebay, they don't really sell for a premium, like the stopper. Also, I see used foundation kits on Keh pretty regularly.
LOG IN TO REPLY |
*sigh* Hardware Master (or something like that)  25,131 posts Likes: 45 Joined Feb 2011 Location: Phoenix, AZ More info | Jun 01, 2012 19:50 | #1173 MOkoFOko wrote in post #14518392 :p Soon after turned out to be 12 months Should have went with a big stopper instead--you might have it in your hands by now!!Well I hadn't planned on it being 12 months... it just ended up being that long...
LOG IN TO REPLY |
MOkoFOko nut impotent and avoiding Geoff 19,889 posts Likes: 22 Joined Jun 2010 Location: Michigan More info | Jun 01, 2012 19:51 | #1174 Well someone here does
LOG IN TO REPLY |
*sigh* Hardware Master (or something like that) 25,131 posts Likes: 45 Joined Feb 2011 Location: Phoenix, AZ More info | Jun 01, 2012 19:53 | #1175 |
MOkoFOko nut impotent and avoiding Geoff 19,889 posts Likes: 22 Joined Jun 2010 Location: Michigan More info | Jun 01, 2012 19:53 | #1176 |
MOkoFOko nut impotent and avoiding Geoff 19,889 posts Likes: 22 Joined Jun 2010 Location: Michigan More info | Jun 01, 2012 19:54 | #1177 doo eet! Too bad I already have a 77... and a 72 now.
LOG IN TO REPLY |
*sigh* Hardware Master (or something like that) 25,131 posts Likes: 45 Joined Feb 2011 Location: Phoenix, AZ More info | Fail.  Image hosted by forum (598816) © *sigh* [SHARE LINK] THIS IS A LOW QUALITY PREVIEW. Please log in to see the good quality stuff.
LOG IN TO REPLY |
themadman Cream of the Crop  18,871 posts Likes: 14 Joined Nov 2009 Location: Northern California More info | Jun 01, 2012 19:55 | #1179 MOkoFOko wrote in post #14518348 Give it to Francesca Eastwood. She'll put it to good use http://shine.yahoo.com …0k-handbag-220200478.html Kinda disgusting IMO. I think those who are fortunate to have that much money should not destroy it (literally). If you want to get rid of it, donate it or something! Will | WilliamLiuPhotography.com
LOG IN TO REPLY |
jdizzle Darth Noink 69,419 posts Likes: 65 Joined Aug 2006 Location: Harvesting Nano crystals More info | Jun 01, 2012 19:56 | #1180 Here KC. This is what I did. I'm in the middle of having some ring adapters CNC'd from a friend at work. What I did was remove the inner thread from the ring and glued it on a hacksawed spare cap. My coworker was talking about CNCing stuff and asked him if he can rework the ring and clean it up. He's going to give it to a friend who has the equipment and I hope he pulls through! 
LOG IN TO REPLY |
MOkoFOko nut impotent and avoiding Geoff 19,889 posts Likes: 22 Joined Jun 2010 Location: Michigan More info | Jun 01, 2012 19:57 | #1181 |
MOkoFOko nut impotent and avoiding Geoff 19,889 posts Likes: 22 Joined Jun 2010 Location: Michigan More info | Jun 01, 2012 19:59 | #1182 themadman wrote in post #14518420 Kinda disgusting IMO. I think those who are fortunate to have that much money should not destroy it (literally). If you want to get rid of it, donate it or something! EDIT: Was she on bath salts when she did that?  It was some stupid stunt by that douchebag photographer who's been taking pictures of starlets wearing meat and holding knives. The guy is a disappointment to the profession.
LOG IN TO REPLY |
jdizzle Darth Noink 69,419 posts Likes: 65 Joined Aug 2006 Location: Harvesting Nano crystals More info | Jun 01, 2012 19:59 | #1183 MOkoFOko wrote in post #14518400 Well someone here does You could have sold one of those adapters to one of the several on this forum who were searching for them. Myself included Oh ok. I really need an extra one.
LOG IN TO REPLY |
*sigh* Hardware Master (or something like that) 25,131 posts Likes: 45 Joined Feb 2011 Location: Phoenix, AZ More info | Jun 01, 2012 20:00 | #1184 jdizzle wrote in post #14518427 Here KC. This is what I did. I'm in the middle of having some ring adapters CNC'd from a friend at work. What I did was remove the inner thread from the ring and glued it on a hacksawed spare cap. My coworker was talking about CNCing stuff and asked him if he can rework the ring and clean it up. He's going to give it to a friend who has the equipment and I hope he pulls through!  That's awesome. Make a batch of them, I'm sure lots of people would be interested. MOkoFOko wrote in post #14518431 tried another link. looks good now
LOG IN TO REPLY |
jdizzle Darth Noink 69,419 posts Likes: 65 Joined Aug 2006 Location: Harvesting Nano crystals More info | Jun 01, 2012 20:02 | #1185 *sigh* wrote in post #14518438 That's awesome. Make a batch of them, I'm sure lots of people would be interested. You use the 150 kit on that though, right? Although that looks like the normal kit... I hope his friend can. I would sell it.
LOG IN TO REPLY |
 | x 1600 |
| y 1600 |
| Log in Not a member yet?
Register to forums
Registered members may log in to forums and access all the features: full search, image upload, follow forums, own gear list and ratings, likes, more forums, private messaging, thread follow, notifications, own gallery, all settings, view hosted photos, own reviews, see more and do more... and all is free. Don't be a stranger - register now and start posting!
|
| ||
| Latest registered member is Thunderstream 1320 guests, 118 members online Simultaneous users record so far is 15,144, that happened on Nov 22, 2018 | |||
