3 axis gimbal

http://www.youtube.com …=UU7Q3kTW31Zey7​9mrYaB6Pug

I've watched Tom Antos's review on CAME 7000 gimbal. I was in a market for stabilzer and never though of 3 axis gimbal because they are usually expensive. However, this one is just under $1k

The basic features are:
3k carbon fiber gimbal
3-axis AlexMos controller
Battery and charger
one BGM5208-200T-12 and two BGM5208-75 motor

I've seached ebay and all these three motors and a board would come out maximum price of $400 + $200 the shell from came-tv would be total of $600? so would diy be better cost with the same part and models? maybe I have to add $100 for batteris and controller.

Would this hold 5dmk2 and tamron 24-70?

I'm curious if this actually performs better than a Merlin/blackbird/glide​cam type of device.

Jason Howell wrote in post #16747366
I'm curious if this actually performs better than a Merlin/blackbird/glide​cam type of device.

even with the expensive ones, there are still some wobblings.

Hi everyone, I took the time and compiled together a full page of references for you to read on if you are interested in assembling your own 3-Axis Brushless Gimbal, I decided to go with Came-7000 from Came-tv.com because their product is sturdy, their customer service is good, and I got the kit within 3 days. Even cinematographer Tom Antos feels this is the best within the price range (under $1k).

So if you plan to build your own gimbal, consider using this page as reference.
http://www.mdifilm.com​/2013/?p=1291

Enjoy!

Mdifilm wrote in post #16778145
Hi everyone, I took the time and compiled together a full page of references for you to read on if you are interested in assembling your own 3-Axis Brushless Gimbal, I decided to go with Came-7000 from Came-tv.com because their product is sturdy, their customer service is good, and I got the kit within 3 days. Even cinematographer Tom Antos feels this is the best within the price range (under $1k).

So if you plan to build your own gimbal, consider using this page as reference.
http://www.mdifilm.com​/2013/?p=1291

Enjoy!

Hey, I've watched your films on youtube already Nicely done on the review. What is the PID setup for your gimbal? Also what and where can we buy the extra battery?