DPP-4 "Users" + 7D-2 raw files?

I just downloaded & installed DPP-4, to view & evaluate some of the 7D-2 raw files from Imaging Resource.

I'm familiar with DPP-3, but I'm finding the DPP-4 interface somewhat confusing.

The Imaging resource .CR2 file opens in a "small" window, is the size of a thumbnail, & I'm not finding a way to display it full size.

I'm not having that problem with my 6D raw files; so I'm not sure what's going on with the Imaging resource raw files?

http://www.imaging-resource.com …/E7D/E7DFARI064​00.CR2.HTM

Leigh

Canon has not updated DPP with the 7D2 codes. I suspect this will not happen until the camera is released.

Try to convert it to DNG, might or might not work. Worth a shot.

Leigh wrote in post #17160990
I just downloaded & installed DPP-4, to view & evaluate some of the 7D-2 raw files from Imaging Resource.

I'm familiar with DPP-3, but I'm finding the DPP-4 interface somewhat confusing.

The Imaging resource .CR2 file opens in a "small" window, is the size of a thumbnail, & I'm not finding a way to display it full size.

I'm not having that problem with my 6D raw files; so I'm not sure what's going on with the Imaging resource raw files?

http://www.imaging-resource.com …/E7D/E7DFARI064​00.CR2.HTM

Leigh

I tried the exact same thing yesterday and got the same results.

UP-DATE:

Oddly enough, "these" files opened just fine in Photoshop CS-6 / ACR

Leigh

Don't know if there has been an update to ver. 4, but it was originally released for full frame models only.

greenjeans wrote in post #17161442
Don't know if there has been an update to ver. 4, but it was originally released for full frame models only.

"Duh" on me! --- You're absolutely right.

The files opened fine in DPP-3

Leigh

Leigh wrote in post #17161608
...

The files opened fine in DPP-3

Leigh

That's strange. I tried open them yesterday using DPP 3.14.15.0 and they wouldn't open. I just tried again with the same result. No preview image, just a square where the image should be and no way to edit it. The only thing I'm getting is the EXIF data.

You could try this from a previous thread,worked with my 650D.
http://www.canonwatch.​com …d-raw-files-little-trick/

You can open them in raw therapee and then select a diff color profile.

crofter wrote in post #17161660
You could try this from a previous thread,worked with my 650D.
http://www.canonwatch.​com …d-raw-files-little-trick/

This didn't work for me. It showed the thumbnail preview image but I couldn't edit it or even display the EXIF data. With DPP 3 I was able to see the EXIF data. Oh well.

You can open it with XnView or XnViewMP >> http://www.xnview.com , everything which is an image/icone or related xnview will open it

Looks like I was wrong in thinking that Canon was putting all new bodies into DPP4, and it seems they updated 3.14 instead for the 7D2 raw files now. Seems like an odd turn of events unless they wanted to leverage code that was in 3.14 from the 7D and other APS-C bodies.

I may be missing something, but the raw file linked above is from 2010, and is stated to be from a 7D - not a 7DII. Any 7D file should open in LR 3.14.xx. Somebody help me out, please.

Don't worry about those, just pull the raw files for the 7D2 announcement from Imaging Resources, if you would like to do some comparisons.

Here are some raw links:

http://www.imaging-resource.com …ii/canon-7d-mark-iiA7.HTM

Canonrumors link to the Canon download page
http://www.canonwatch.​com …-released-canon-software/