I haven't messed with my lights in a while before my surgery to be exact. IIRC the plus/Max channels are a different number from the ITTL radio channels. Ie channel one on the max or plusdoesn't work with channel one on the mini or flex IIRC the ITTL is double digit compared to the single digit for the plus/Max.
Also the radio channels for the sekonic meter radio is different still.
Does anyone have a cross reference chart for all of these.
I left off trying to configure everything so one option would allow me to setup this complex setup and use the sekonic to test the lights and trigger a remote camera.
I setup the main camera with a mini and zone controller. Would like for it to also trigger the remote camera and one set of lights positioned for the main camera use.
Setup a remote camera with a mini and zone controller it triggers the lights in the remote cameras area.
I would like to a) test each group using the sekonic so I can adjust the power of that group., b) once everything is setup use the sekonic ti trigger the remote camera seperately from the main camera.
Also depending on the venue I may be using studio flashes with a plus radio.
So the plus radios need to be on a channel that the ITTL can trigger.
The ITTL radios need to be setup to trigger the plus radios and one needs to trigger the remote camera.
The sekonic will need to trigger both the ITTL and plus radios plus be able to trigger the remote camera.
I'm aware it's possible but will require constant changing of the settings on the sekonic but I want to setup channel a to be straight normal use and channel b as the complex remote setup.
