$26 shipped and fees
The eyepiece extender extends the eyecup 5/8" (15mm) from the camera body. This is useful for eyeglass wearers and others to keep the tip of the nose from touching the camera screen.
Compatible with the following Canon cameras:
- 7D
- 7D Mark II
- 5D Mark III
- 5D Mark IV
- 5DS
- 5DS R
- 1D C
- 1D Mark III
- 1D Mark IV
- 1D X
- 1D X Mark II
- 1Ds Mark III
• Aftermarket : The 3rd party extender came with its own eyecup with a flat back which is slightly different from the Eg eyecup that comes with your camera.
• 3D Printed : Grooves were cut out so that the OEM (Eg) eyecup that came with the camera can be used without have to buy new ones. If you lost or need replacements, you can purchase from Amazon, B&H Photo and Adorama.
• Aftermarket : The 3rd party extender came with a cheap plastic lens to "help" magnify your view.
• 3D Printed : Sole purpose of this is to extend the eyecup so that your face is not near or touching the screen. Also, the plastic lens only made your view even more distorted.
One thing that will still be the same is that some of the corners may be cut off when looking through the viewfinder because your view is now further away. Also, the viewfinder and OEM eyecup is rectangular while the extenders opening is a square. So this will require you to make slight adjustments to the positioning of your head when looking through the viewfinder.
*NOTE* 3D prints and fitment will vary depending on the machine, nozzle, filament and/or settings. 3D eyecup extenders may have a snug fit when mounting onto camera and reinstalling rubber eyecup.
Here is a rough representation of image cutoff on the corners with phone put up against viewfinder
