High-intensity driving lights are great when you are behind the wheel, but when a pair of them come straight at you from a corner they can play total havoc with the shot exposure (and WB). This is made even worse when you are having to add say a third of a stop for everyone else is the field due to lighting conditions. There are two answers to this, sneak into the paddock and paint out the lights, or change the exposure metering.
The following refers to the 1D and the MK-II should be the same. The 10D does not have the same sort of spot metering and getting it right is more of a challenge. All shots are taken in RAW mode.
Here are three shots to demonstrate the effect. The first one's exposure has been effected by the lights. The second is using C1 to correct the problem of the first shot. The third is changing the metering to Spot and then meter off the top edge of the windshield (no other adjustments).
Exposure effected by the lights. The WB is also effected by the color tint of the lights.
![]() | Byte size: ZERO | Content warning: NOT AN IMAGE |
This is the same image with exposure and WB adjusted in C1. It has left some noise that needs further processing.
![]() | Byte size: ZERO | Content warning: NOT AN IMAGE |
This is using spot metering and is straight from the camera, via C1 with no further adjustments.
![]() | Byte size: ZERO | Content warning: NOT AN IMAGE |
If you are at a meeting where some of the cars are using driving lights then check your histogram to make sure the exposure hasn't been effected and then make any necessary adjustments.


)
