BMX - in the late (UK winter) hours

OK, i know nothing about PP work. all i have done is cropped a little, adjusted level to make it look ( as i see) better than it did. do not expect it to look like a lot of other i have seen on this site. i am a very new newbee. This was taken late afternoon in a dark and gloomy park!!

Be kind, but honest.

Thanks.

http://sjmconsult.zenf​olio.com …photo=h20D8DB7F​#551082879

Just added a few more!!

http://sjmconsult.zenf​olio.com/p975966102/

thanks

No-one!!

Some very nice pics there but you might get a better response if you embed them in the thread...

As advised, i have put the pics in the link.

Thanks.

1.

HTTP response: 404 | MIME changed to 'text/html' | Byte size: ZERO

HTTP response: NOT FOUND | MIME changed to 'image/png' | Redirected to error image by ZENFOLIO PROTECTED

HTTP response: 404 | MIME changed to 'text/html' | Byte size: ZERO

HTTP response: 404 | MIME changed to 'text/html' | Byte size: ZERO

HTTP response: 404 | MIME changed to 'text/html' | Byte size: ZERO

Really like number 5

Number one is alright, I don't normally go for tilts, but that one works okay, a little bit dark and flat though. If number 5 was a can-can and he landed that from that height that's pretty bloody good, you might want to try off camera flash to give some more interesting lighting, the straight on flash is a bit distracting and flat.

I echo some of the comments already made about flash (and how that guy pulled the NF can from there to pedals..) and would add that #2 could be great if shot from the opposite side below the rider. Unless you are tapped into the scene, you'd never know that was an over move which would be more obvious from the other side. It might also be more dramatic and eliminate some of the sky which was obviously metered into the shot (hence the underexposed rider).

Nice shots all in all, I wish we could ride outside now...only 5 more months until sprummer (we don't really get spring here). Have fun, keep shooting and ripping!

Thanks for the comments. Not sure on meetering at all!! like i say, got to learn, lots!!

Thanks again.