Background: The 40D has a special center AF point with, at the time it was introduced, the world’s first high-precision diagonal cross-type AF sensor. According to Canon this diagonal sensor functions with lenses with maximum apertures of f/2.8 or larger.
The Problem: Most lenses, even the “L”s, with maximum apertures of f/2.8 are noticeably softer wide-open than similar lenses that start at f/4.0.
The Conundrum/Question: Would I rather have a standard cross-type AF point through a sharp lens, or a high-precision AF point through a softer lens?
Note 1: Canon cameras Autofocus only through a lens's maximum aperture.
Note 2: This thread assumes that a quality f/2.8 lens is not as sharp wide-open as a quality f/4.0 lens when wide-open. If you disagree, do some research and you’ll find that this is almost universally true when comparing lenses of equal cost and/or quality.
Pre-work: I have a 40D and my only lens with a f/2.8 or faster lens is the 50mm f/1.8 II which is terribly soft at f/1.8. It is rather sharp at f/2.8 but I can’t seem to force it to f/2.8 when focusing. I did try setting the aperture to f/2.8, then holding down the “DOF preview” button but the autofocus doesn’t work with the DOF preview button held down.
I am feeling a need for a quality f/2.8 lens just to take advantage of this “feature” in the 40D. Then, I stop myself and ask, “Is this just a marketing ploy to get folks to buy more lenses?”
Stu 
