Made these guys out of old binder dividers...
 | HTTP response: 404 | MIME changed to 'text/html' | Byte size: ZERO |
They attach like this:
| HTTP response: 404 | MIME changed to 'text/html' | Byte size: ZERO |
and they produce this:
| HTTP response: NOT FOUND | MIME changed to 'image/gif' | Redirected to error image by FLICKR |
Also built a beauty dish style reflector so I can diffuse somewhat while still retaining harsher shadows than when used with an umbrella or even a stofen. This is made out of a parabolic reflector from a reflector lamp. I cut off the threaded area on the back, and then cut 4 notches so I could adjust the metal sides to adequately fit the flash head, since I knew I was using velcro. I taped over all the sharp areas with electrical tape. I then made a reflector plate inside to bounce the speedlite's flash back into the reflector, which was secured with wood screws that were later hot glued to ensure they remained in place. I painted it matte white and called it a day--works great!
