EOS 300D CCD problem?

I think I have a dirty sensor, I hope it is, well I hope thats all it is. Please can some one advise me?

HTTP response: 404 | MIME changed to 'image/gif' | Byte size: ZERO | PHOTOBUCKET ERROR IMAGE

HTTP response: 404 | MIME changed to 'image/gif' | Byte size: ZERO | PHOTOBUCKET ERROR IMAGE

Read/do this. It describes a much better way of checking your sensor than you're using - ie take a photo of the sky at F32. I see no dirt on your sensor, just strange lines.

These two images don't help much.

If you have sensor dust, then the best way to see it is to shoot a bright blue sky, or a bright white wall, and use a fairly high aperture number. Frequently, you won't see any problem at f/4 or f/8. Then it starts to show better by f/11, and by f/16 or f/22 the dust is as clear as a bell.

The 300D has a CMOS sensor, not a CCD sensor.

---Bob Gross---

those lines are very strange.
I don't think cleaning the sensor will help

Those taken with the same lens? Did you just clean the lens?

Those lines on your photos do not look like a dirty sensor.
It looks like something is wrong with the sensor or the electronics.
You'd better take your camera to a Canon service center.

Your CMOS sensor is actin' up. I would have it checked out asap. Banding like that is not normal.